|
Parts List all items are made in USA and from high quality materials and workmanship free shipping to 48 states US only
|
 |
Plant Growing Cube - 1 5 1/2" X 5 1/2" X 1" thick,re-usable,hand crafted Part # PGC-1
used to hold germinating seeds or plant cuttings and then grow to full term or transplant has threaded hole for plant stake |
US & foreign patents pending
|
|
|
Price: $16.50 each(min.2) |
|||
 |
Plant Growing Cube - 5 5 1/2" X 5 1/2" X 1" thick, re-usable, hand crafted Part # PGC-5
used to hold germinating seeds (5 stations) or plant cuttings and then grow to full term or transplant has threaded hole for plant stake |
US & foreign patents pending
|
|
|
Price: $17.50 each(min.2) |
|||
 |
Plant Propagating Cube - 8 5 1/2" X 5 1/2" X 1" thick, re-usable, hand crafted Part # PPC-8
used to root larger plant cuttings (8 stations) and then grow to full term or transplant plant cube pulls apart for easy plant removal |
US & foreign patents pending
|
|
|
Price: $16.00 each(min.2) |
|||
 |
Plant Propagating Cube - 20 5 1/2" X 5 1/2" X 1" thick, re-usable, hand crafted Part # PPC-20
used to root smaller plant cuttings (20 stations) and then grow to full term or transplant plant cube pulls open for easy plant removal |
US & foreign patents pending
|
|
|
Price: $8.00 each(min.2) |
|||
 |
Blank Cube 5 1/2" X 5 1/2" X 1" thick, re-usable, hand crafted Part # BC-1
used to cover an unused growing station
|
US & foreign patents pending
|
|
|
Price: $9.00 each(min.2) |
|||
 |
Seed Disk - 1 1 3/16" diameter X 7/16" thick, re-usable, hand crafted Part # SD-1
used to germinate seeds; can grow to full term or transplant into a growing cube or outside in garden |
US Patent #7,426,802, B2 foreign patents pending
|
|
|
Price: $1.75 each(min.20) |
|||
 |
Seed Disk Assembly Tool
Part # SDAT
used to assembly the seed disk & mesh when the seed disk mesh biodegrades you can re-use the seed disk by replacing the mesh screen |
|
|
|
Price: $6.50 each |
|||
 |
Seed Disk Mesh Screen Fine
Part # SDMS - Fine
used to replace biodegraded seed disk mesh. use fine mesh for small seeds like strawberry, thyme, oregano, etc. |
US & foreign patents pending
|
|
|
Price: $4.00 for 40 screens |
|||
 |
Seed Disk Mesh Screen Medium
Part # SDMS - Medium
used to replace biodegraded seed disk mesh. use medium mesh for bigger seeds like peppers, tomato, dill, etc. |
US & foreign patents pending
|
|
|
Price: $4.00 for 40 screens |
|||
 |
Seed Disk Mesh Screen Large
Part # SDMS - Large
used to replace biodegraded seed disk mesh. use large mesh for larger seeds like bean, grape, cornl, etc. |
US & foreign patents pending
|
|
|
Price: $4.00 for 40 screens |
|||
 |
Seed Disk Extractor
Part # SDE
used to insert or remove seed disk from plant growing cube and will not damage seedlings when inspecting roots or transplanting seed disk to another cube |
|
|
|
Price: $3.75 each |
|||
 |
Plant Support Disk - 1 1 1/2" diameter X 3/4" thick, re-usable, hand crafted Part # PSD-1
used to cover germinating seeds or hold a plant cutting until it roots or support a plant for full term growth
|
US & foreign patents pending
|
|
|
Price: $0.55 each(min.20) |
|||
 |
Plastic Plant Support Stake - 4 inches 1/2" diameter X 4" long (Delrin), re-usable, hand crafted Part # PSS-03
used to support a plant for full term growth used as a handle to lift growing cube up (inspect roots) one end is threaded so can screw into a growing cube |
|
|
|
Price: $4.00 each(min. 5) |
|||
 |
Plastic Plant Support Stake - 6 inches 1/2" diameter X 6" long (Delrin), re-usable, hand crafted Part # PSS-06
used to support a plant for full term growth used as a handle to lift growing cube up (inspect roots) one end is threaded so can screw into a growing cube |
|
|
|
Price: $6.00 each(min.5) |
|||
|
|
Plastic Plant Support Stake - 12 inches 1/2" X 12" long (Delrin ), re-usable, hand crafted Part # PSS-12
used to support a plant for full term growth used as a handle to lift growing cube up (inspect roots) one end is threaded so can screw into a growing cube |
|
|
|
Price: $8.00 each(min.5) |
|||
|
|
Plastic Plant Support Stake - 18 inches 1/2" X 12" long (Delrin), re-usable, hand crafted Part # PSS-18 Maple
used to support a plant for full term growth used as a handle to lift growing cube up (inspect roots) one end is threaded so can screw into a growing cube |
|
|
|
Price: $12.00 each(min.5) |
|||
 |
Misting Nozzle - 180 degrees 5 gallons per hour at 10 PSI (plastic, brown) Part # MN-180
used to mist germinating seeds, plant cuttings, and plants growing to full term
|
|
|
|
Price: $0.45 each(min.20) |
|||
 |
Misting Nozzle - 300 degrees 5 gallons per hour at 10 PSI (plastic, brown) Part # MN-300
used to mist germinating seeds, plant cuttings, and plants growing to full term
|
|
|
|
Price: $0.45 each(min.20) |
|||
 |
Misting Arm - 14 14 misting nozzles, made with 1/2" CPVC tubing, hand crafted Part # MA-14
used to mist germinating seeds, plant cuttings, and plants growing to full term with no dry spots
|
US & foreign patents pending
|
|
|
Price: $75.00 each |
|||
 |
Misting Arm Bracket - 14 made of 1" PVC right angle, hand crafted Part # MAB-14
used to hold misting arm in place and holds Platform Top with legs in the up position so can inspect roots, check water level, and etc |
US & foreign patents pending
|
|
|
Price: $45.00 each |
|||
 |
Misting Arm Hose Assembly hand crafted Part # MAHA-1
used to connect the water pump to the misting arm
|
US & foreign patents pending
|
|
|
Price: $10.50 each |
|||
 |
Drain Hose Assembly hand crafted Part # DHA-1
used to remove water from the growing chamber
|
US & foreign patents pending
|
|
|
Price: $6.50 each |
|||
 |
Water Pump - 1200 1200 gallons per hour (Little Giant) Part # WP-1200
used to mist germinating seeds, plant cuttings, and plants growing to full term or for transplanting
|
|
|
|
Price: $125.00 each |
|||
 |
Water Filter re-usable Part # WF-1
used to filter water before reaching the misting arm nozzles
|
|
|
|
Price: $0.35 each(min.10) |
|||
 |
Cycle Timer - 2 125 VAC, 15 amps, 1 HP Part # CT-2
used to set misting 'ON / OFF' duration and frequency times; settings are: 25 seconds to 30 minutes 'ON' and 7 minutes to 8 hours 'OFF' |
|
|
|
Price: $105.00 each |
|||
 |
Platform Top with legs and splash guards 20 1/2" square X 3/4" thick (solid HDPE), hand crafted Part # PT-9
used to hold 9 growing cubes or 9 germinating cubes or 9 propagating cubes or any combination of 9 cubes |
US & foreign patents pending
|
|
|
Price: $155.00 each |
|||
 |
Growing Chamber - 35 35 gallons with top four edges re-enforced (LDPE),hand crafted 19 1/2" square X 27 3/4" tall ( 1/8" thick) Part # GC-35
used to germinate/root/grow all types of seeds and plants cuttings for transplanting or grow full term |
US & foreign patents pending
|
|
|
Price: $120.00 each |
|||
 |
Dolly Cart 17 1/4" square X 4" tall, 3/8" thick (sanded HDPE), hand crafted Part # DC-4
used to move the growing chamber around with ease if using artificial lighting easy to pull out from under lights 2" swivel casters are hidden by 4" side panels-a must have!!! |
US & foreign patents pending
|
|
|
Price: $75.00 each |
|||
 |
New Wave T5-22 2 foot long fluorescent fixture with 2 lamps Part # NW T5-22
high output lamps, 2,000 lumens each lamp 6500 or 3000 Kelvin, low heat (24 watts @ lamp) solid state electronic ballast (no noise) 2 year warranty on fixture & 1 year on lamps |
|
|
|
Price: $110.00 each |
|||
 |
Sun Lift Hangers simple way to raise fluorescent fixture as plants grow Part # SL Hangers
tension mechanism keeps fixture in place once set support strings pull out and retract like a yo-yo comes in a pair and can support up to 22 lbs. includes hardware |
|
|
|
Price: $30.00 each |
|||
|
|
New Wave T5-24 2 foot long fluorescent fixture with 4 lamps Part # NW T5-24
high output lamps, 2,000 lumens each lamp 6500 or 3000 Kelvin, low heat (24 watts @ lamp) solid state electronic ballast (no noise) 2 year warranty on fixture & 1 year on lamps |
|
|
|
Price: $160.00 each |
|||
 |
T5 2 ft long High Output 6500 Kelvin Cool Lamp fluorescent lamp, low heat, 24 watts, 2000 lumens Part # T5 2ft - 6500 Kelvin
used to promote plant growth light is blue oriented spectrum 1 year warranty |
|
|
|
Price: $16.95 each(min.4) |
|||
|
|
T5 2 ft long High Output 3000 Kelvin Warm Lamp fluorescent lamp, low heat, 24 watts, 2000 lumens Part # T5 2ft - 3000 Kelvin
used to promote plant flowing/fruiting light is red/orange oriented spectrum 1 year warranty |
|
|
|
Price: $16.95 each(min.4) |
|||
 |
Wire Suspension Hanging Kit simple way to raise heavier light fixture as plants grow Part # WSH Kit
cable hanging system, attractive & clean appearance can easily adjust light fixture up or down complete with 2 - 8 ft long stainless cable & hardware |
|
|
|
Price: $34.00 each |
|||
|
|
Flora Nova - Grow 1 quart (plastic bottle) Part # FNG - 1 qt
contains all essential macro and micro nutrients balanced for growing seedlings through harvest super concentrated and pH stabilized use about 1/2 to 3/4 tsp per gallon |
|
|
|
Price: $27.75 each |
|||
|
|
Flora Nova - Bloom 1 quart (plastic bottle) Part # FNB - 1 qt
contains all essential macro and micro nutrients use during the plants flowering & fruiting stage super concentrated and pH stabilized use about 1/2 to 3/4 tsp per gallon
|
|
|
|
Price: $27.75 each |
|||
 |
Combo Waterproof pH/EC/TDS/Temp Tester High accuracy all in one tester by Hanna Part # COMBO HANNA-1
used to test water pH, TDS (total dissolve solid)& temp all serious growers must have! pH 0 to 14, TDS 0 to 2000, temp 32 to 140 degrees F |
|
|
|
Price: $219.00 each |
|||
 |
pH 4.0 Calibration Solution 8 ounce bottle Part # pH 4.0-8
used to calibrate your pH meter
|
|
|
|
Price: $9.95 each |
|||
|
|
pH 7.0 Calibration Solution 8 ounce bottle Part # pH 7.0-8
used to calibrate your pH meter
|
|
|
|
Price: $9.95 each |
|||
 |
1500 ppm Calibration Solution 230-ml bottle Part # 1500ppm-230-ml
used to calibrate your EC/TDS/PPM meter
|
|
|
|
Price: $15.95 each |
|||
 |
pH Control Kit 8 oz. pH upper, 8 oz. pH downer, and 1 oz. indicator & vial Part # pH CK-8
used to adjust water pH
|
|
|
|
Price: $18.95 each |
|||
|
Thin Air Growing Systems Owners Manual |
|||
 |
Owners Manual
Part # OM-9
step by step set up and operational instructions lots of illustrations full of helpful comments and growing ideas |
US & foreign patents pending
|
|
|
Price: $95.00 each |
|||